Llámenos
(813) 440-8108
-
ECM Motor Testers: Which Tool Works With Which Motor
A tool-by-tool guide to ECM motor testers: which covers each motor family and what a pass or fail tells you.
Read now -
Heil, Tempstar and Comfortmaker Furnace Error Codes Explained
ICP furnace LED status codes with the blower-related codes first (4 flashes, 7 flashes), stored-code retrieval, the component test and when the motor is the cause.
Read now -
Communicating Furnaces (Carrier Infinity, Lennox iComfort, Trane ComfortLink): Can a Programmed Replacement Motor Work?
What communicating systems change at the blower motor, which faults point to the motor and which to the furnace board, and what a replacement must match.
Read now -
Inducer Motor vs Blower Motor: How to Tell Which One Failed
Where the furnace heating sequence stops tells you which motor failed. A sequence-based check, with the pressure switch faults that fool techs.
Read now -
Heat Pump Air Handler Blower Motor in Winter: Aux Heat, Defrost and Airflow
How the air handler blower works with aux heat strips and defrost in cold weather, and the order of checks that proves the motor before the board.
Read now -
ECM Blower Motor Failure Atlas: Failure Modes by Climate and Season
ECM blower motors fail in patterns that follow the climate and the season: water and lightning in hot, humid regions, dust and static pressure in hot, dry ones, and long...
Read now -
Blower Running But No Airflow: Causes, Test and Replacement
When the blower motor is clearly running but little or no air comes out of the registers, the motor is usually not the failure.
Read now -
ECM Motor Speeds Up and Slows Down: Causes, Test and Replacement
An ECM blower that speeds up and slows down during a call is not always faulty. Variable-speed motors change speed when the equipment changes stage, and programmed ramps and delays...
Read now -
Códigos de error de hornos Lennox explicados
Referencia de códigos E de Lennox para hornos de velocidad variable, con los códigos del soplador (E201, E202, E291, E292, E295) primero, además de los pasos de reinicio y cuándo...
Read now -
Códigos de error de hornos Goodman, Amana y Daikin explicados
Guía de códigos de falla de 7 segmentos de Goodman y Amana para la familia CVC96/MVC96, primero los códigos b0 a b9 del soplador circulador, luego la tabla de códigos...
Read now -
Códigos de error de hornos Rheem y Ruud explicados
Códigos de siete segmentos de hornos Rheem y Ruud de los manuales 801T y R96V, con los códigos del soplador (61, d6, d1) primero, además de los reinicios de bloqueo...
Read now -
Códigos de error de hornos Trane y American Standard explicados
Guía de códigos de destellos LED para los controles integrados de hornos Trane y American Standard, ordenada para que los códigos relacionados con el soplador (4 y 10 destellos) aparezcan...
Read now
