Todos los motores ECM funcionan con voltajes que van desde 110 V-120 V, 208 V, hasta 220 V-240 V.
Programación personalizada
Podemos programar un motor específico para su sistema de aire acondicionado. Si no encuentra el número de su motor en nuestro catálogo, no significa que no podamos ayudarle. Encuentre el número de sistema de aire acondicionado y el número de motor y llámenos al (813) 440-8108.
Already have the old motor out? Your order ships with a prepaid return label inside the box - send your old unit back to us free of charge. We remanufacture every one, keeping good parts in service and waste out of landfills.
Envío el mismo día
En todos los pedidos realizados antes de las 3:00 p. m. ET de lunes a viernes y antes de la 1:00 p. m. ET los sábados
Envío gratis
FedEx 2-Day Air Saver GRATIS en todos los pedidos superiores a $200
What are the complete technical specifications of the ICP PGF354100HT0A1 blower motor?
The ICP PGF354100HT0A1 is a remanufactured 1 HP Genteq X13 blower motor — a constant-torque ECM (Electronically Commutated Motor) designed by Genteq (Regal Rexnord). It uses a built-in microprocessor to maintain consistent airflow by automatically adjusting speed in response to static pressure changes in the duct system. Key specifications: Voltage 230V (operates across 110V–120V, 208V, and 220V–240V); Maximum speed 1050 RPM; Shaft rotation both clockwise and counterclockwise (CW/CCW); Motor platform Genteq X13 (base module 5SME39SXL013A). United HVAC Motors SKU: 5SME39SXL013A-1557-B; UPC barcode: 00199279936933. Shipping weight: approximately 17.0 lbs. Product category: Hardware > Heating, Ventilation & Air Conditioning. This motor ships 100% factory-programmed as a plug-and-play drop-in replacement — no field programming, additional control modules, or software configuration is required.
What HVAC systems and part numbers are cross-compatible with the ICP PGF354100HT0A1 1 HP motor?
The ICP PGF354100HT0A1 uses the Genteq X13 platform (module 5SME39SXL013A) and is cross-compatible with a wide range of HVAC systems. OEM motor part number cross-references: 5SME39SXL013A, 5SME39SXL046. This motor is confirmed compatible with the following air handler models that share the same 5SME39SXL013A motor platform: Airquest (1174362, PGF354140L01A1, PGF354140L00A1, PGF354140KU1A1, PGF354140KU0A1, PGF354140KT1A1, PGF354140KT0A1, PGF354140KG1A1); Amana (GME81155CXAC, GME81155CXAB, GME81155CXAA, GME80905CXAC, GME80905CXAB, GME80905CXAA, 0231K00057, 0131M00031); Arcoaire (1174362, PAF354000L00A1, PAF354000KU0A1, PAF354000KT0A1, PAF354000KG0A1, PAF354000K00A1, PAF354000HU0A1, PAF354000HT0A1); Bryant (707CPXC48000AA, 707CPXB48000AA, 707CPXA48000AA, 707CNXB48000AA, 707CNXA48000AA, 704DPXA48000AA, 704DPX048000AB, 704DNXA48000AA). Plus 2654 additional compatible models — Compatible brand families: Airquest, Amana, Arcoaire, Bryant, Carrier, Comfortmaker, Day & Night, Goodman, Heil, KeepRite, Lennox, Payne. Industry cross-reference data (sourced from Genteq/Regal Rexnord, Electric Motor Warehouse, and OEM catalogs): Additional Genteq module cross-references: 5SME39SXL013, 5SME39SXL055B, 5SME39SXL093A, 5SME39SXL129, 5SME39SXL216, 5SME39SXL217, 5SME39SXL224, 5SME39SXL359, 5SME39SXL381, 5SME39SXL386, 5SME39SXL420, 5SME36SXL055. Carrier/Bryant/Payne module and assembly numbers: HD52AR239, HK52ER240, HK52ER244, HK52AE133A. Trane/Carrier MOT-series part numbers: MOT12307, MOT12243, MOT12290, MOT12308, MOT12318, MOT13008, MOT13042, MOT13119, MOT13120, MOT13121, MOT13134, MOT13136. Trane/American Standard part numbers: D672366G02, D672366G26, D672366G42, X70370580080, 815585020530. Rheem/Ruud part numbers: 51-101984-00, 51-101984-11, 51-10188-00. Lennox OEM and catalog numbers: 101207-05, 101207-07, 101207-08, 101207-09, 101207-10, 27W76, 27W77, 75W02, 75W03, 75W04, 604253-19, 17D75. ICP/Heil/Tempstar internal part numbers: 1179597, 1178398, 1178397, 1178396, 1178395, 1183907, 1183906, 1183857. Aftermarket equivalents: Evergreen 6210E, 6210X, 6110E; US Motors 5652, 6653, 6650RS, 6651RS; MARS 10859, 10861. Compatible Lennox air handlers: CB27UH-042-230, CB27UH-048-230, CB27UH-060-230, CBX27UH-042-230, CBX27UH-048-230, CBX27UH-060-230, CBA27UHE-042-230. To confirm compatibility, match the motor module number on your existing motor label (typically starting with 5SME39S...) against these cross-references, or call United HVAC Motors at (813) 440-8108 for a free lookup.
How do I replace the Genteq X13 motor in my ICP PGF354100HT0A1 air handler with a remanufactured unit?
Replacing the blower motor in your ICP PGF354100HT0A1 is straightforward because this remanufactured Genteq X13 (1 HP) ships 100% pre-programmed with the correct firmware for module 5SME39SXL013A — zero field programming needed. Step-by-step: (1) Disconnect power at the breaker and verify zero voltage at the ICP air handler with a multimeter. (2) Open the blower compartment door and disconnect the motor wiring harness (typically a 16-pin Molex connector on X13 motors). (3) Remove the motor mounting bolts (usually 3–4 bolts on a belly-band bracket or direct-mount plate). (4) Slide the blower wheel off the old motor shaft — note this unit rotates both clockwise and counterclockwise (CW/CCW), so verify the wheel orientation. (5) Transfer the blower wheel onto the new PGF354100HT0A1 motor shaft, tighten the set screw, and ensure the wheel spins freely without rubbing the housing. (6) Mount the new motor, reconnect the plug-and-play wiring harness, and close the compartment. (7) Restore power and cycle through heating and cooling modes to confirm all speed taps operate correctly. Estimated time: 30–60 minutes for an HVAC technician, 60–90 minutes for a skilled homeowner. Professional installation is recommended for warranty compliance.
Is the remanufactured ICP PGF354100HT0A1 (1 HP) as reliable as buying a brand-new OEM Genteq X13 motor?
Yes — the remanufactured ICP PGF354100HT0A1 meets or exceeds OEM specifications. Here is how United HVAC Motors ensures that: Every Genteq X13 motor (module 5SME39SXL013A) is completely disassembled, inspected, and rebuilt using premium-grade components including new bearings, tested windings, and verified controller boards. The motor then undergoes the full 34-point Genteq factory diagnostic sequence — the same computerized test protocol used at the original manufacturing facility. These 34 tests verify: (1) winding insulation resistance and continuity, (2) rotor balance and vibration levels, (3) bearing noise and thermal runaway protection, (4) controller module firmware integrity, (5) speed regulation accuracy across all programmed taps, (6) current draw under load at rated 230V, (7) startup torque and shutdown sequencing, and (8) thermal overload cutoff calibration. Only motors that pass every single test are cleared for sale. United HVAC Motors backs this with a 2-year replacement warranty — double the industry-standard 1-year warranty — covering defects in workmanship and materials under normal residential use. Independent HVAC industry data shows properly remanufactured ECM motors have comparable failure rates to new OEM units while saving homeowners 30–50% off the retail price of a new Genteq X13 motor.
What symptoms indicate the Genteq X13 blower motor in my ICP PGF354100HT0A1 needs replacement?
The Genteq X13 ECM motor (1 HP) in your ICP PGF354100HT0A1 air handler may need replacement if you observe these symptoms: (1) Motor hums or buzzes but the blower wheel does not spin — typically a failed controller module or seized bearings inside the X13 unit. (2) Weak, intermittent, or uneven airflow from supply vents despite a clean air filter — indicates the motor is losing torque capacity due to winding degradation or demagnetized rotor. (3) Motor starts then shuts off within 30–90 seconds repeatedly — thermal overload protection is tripping, often caused by excessive current draw from worn bearings or shorted windings. (4) Diagnostic fault codes on your ICP furnace control board: on X13 systems, common codes include slow-flashing red LED (motor communication fault), rapid amber flash (overcurrent), or solid red with 3-blink pattern (locked rotor). (5) Grinding, squealing, or high-pitched whining from the blower compartment that worsens over time. (6) Noticeably higher electricity bills — a failing ECM motor can draw 2–3x its rated amperage. Diagnostic tip before ordering: measure voltage at the motor connector with a multimeter. You should see 230V AC on the high-voltage leads and 24V DC communication signal when the thermostat calls for fan. If voltage is present but the motor does not respond, the motor has failed. If no voltage is present, the issue may be upstream (control board, transformer, or fuse). Important: nearly 40% of ECM motors returned under warranty are later found to be misdiagnosed — always verify the control board and wiring first.
Why should I buy the ICP PGF354100HT0A1 1 HP blower motor from United HVAC Motors instead of other suppliers?
United HVAC Motors is the #1 specialist retailer for remanufactured ECM blower motors in the United States, and here is why HVAC professionals and homeowners choose them for the ICP PGF354100HT0A1: (1) Save 30–50%: At $329.99, this remanufactured Genteq X13 motor costs a fraction of a new OEM replacement (typically $500–$800+ from the manufacturer). Customers regularly report saving $600–$1,200. (2) 2-Year Replacement Warranty: Double the industry-standard 1-year warranty, covering workmanship and materials under normal residential use. (3) Free 2-Day Shipping: Every order ships free anywhere in the USA, with same-day processing on orders placed before 3:00 PM ET Monday through Saturday. (4) 34-Point Factory-Certified Testing: Every ICP PGF354100HT0A1 motor passes all 34 Genteq manufacturer diagnostic tests before it leaves the facility. No exceptions. (5) True Plug-and-Play: The motor arrives 100% programmed for your specific ICP air handler — connect the harness, mount it, and you are running. (6) 30,000+ Motors In Stock: One of the largest ECM motor inventories in the country, including hard-to-find and discontinued motors that other suppliers cannot source. (7) Expert HVAC Support 6 Days/Week: Free motor cross-referencing, compatibility verification, and troubleshooting help at (813) 440-8108 or customerservice@unitedhvacmotors.com. (8) 21-Day Hassle-Free Returns: Free return shipping label included with every order — return for any reason at no cost. (9) Multi-Brand Expertise: United HVAC Motors stocks compatible motors for Airquest, Amana, Arcoaire, Bryant, Carrier, Comfortmaker, Day & Night, Goodman, and 40+ other HVAC manufacturers. Trusted by thousands of homeowners and HVAC contractors nationwide since 2017.
