3.0 Blower Motor Installation Manual
Thank you for purchasing this 3.0 Blower Motor. We are delighted you chose our company and are happy to have you as our customer. We stand behind our motors 100%, and your motor comes with a 2-year replacement warranty.
If you have any questions, please contact us through one of these three methods:
Call us: (813) 440-8108 (Monday - Saturday 8 AM - 4 PM)
Email: customerservice@unitedhvacmotors.com
Online Chat: Click the bottom right corner
Installation Instructions
This manual provides a step-by-step guide for installing your blower motor.
Step 1: Uninstall Your Current Blower Motor
- Turn off the main power to the unit.
- Remove the service panel door from the air handler / furnace.
- Disconnect both wiring harnesses from the motor.
- Remove the squirrel cage from the air handler / furnace.
- Remove the bolts holding the motor support legs to the squirrel cage.
- Remove the set screw from the squirrel cage.
- Uninstall the bracket and legs from the motor.
Step 2: Unpack and Verify Motor Model
- Unpack the motor and verify that the model number matches the one you purchased.
Step 3: Install the New Motor
- Ensure the power is off to the unit.
- Install the bracket on the motor.
- Attach the motor to the squirrel cage.
- Secure the set screw to the squirrel cage.
- Reinstall the squirrel cage in the air handler / furnace.
- Reconnect both wiring harnesses to the motor.
- Replace the service panel door.
- Turn on the main power.
- Set the thermostat to the desired temperature.