All ECM motors operate at voltages ranging from 110V-120V, 208V, to 220V-240V.
Custom Programming
We can program a motor specifically for your AC System. If you couldn't find your motor # in our catalog - it doesn't mean we can not help you. Find AC System # and Motor # and give us a call at (813) 440-8108.
Already have the old motor out? Your order ships with a prepaid return label inside the box - send your old unit back to us free of charge. We remanufacture every one, keeping good parts in service and waste out of landfills.
Same Day Shipment
On all orders placed by 3 PM ET Monday-Friday & 1 PM ET Saturday
Free Shipping
FREE FedEx 2-Day Air Saver on All Orders over $200
What are the complete technical specifications of the GE Genteq 5SME39NXL522 GE Genteq blower motor?
The GE Genteq 5SME39NXL522 GE Genteq is a remanufactured 3/4 HP Genteq X13 blower motor — a constant-torque ECM (Electronically Commutated Motor) designed by Genteq (Regal Rexnord). It uses a built-in microprocessor to maintain consistent airflow by automatically adjusting speed in response to static pressure changes in the duct system. Key specifications: Voltage 115V (operates across 110V–120V, 208V, and 220V–240V); Maximum speed 400-1200 RPM; Shaft rotation counterclockwise (CCW); Motor platform Genteq X13 (base module 5SME39NXL425). United HVAC Motors SKU: 5SME39NXL425-WA-3-CCW; UPC barcode: 00199279210217. Shipping weight: approximately 18.0 lbs. Product category: Hardware > Heating, Ventilation & Air Conditioning. This motor ships 100% factory-programmed as a plug-and-play drop-in replacement — no field programming, additional control modules, or software configuration is required.
What HVAC systems and part numbers are cross-compatible with the GE Genteq 5SME39NXL522 GE Genteq 3/4 HP motor?
The GE Genteq 5SME39NXL522 GE Genteq uses the Genteq X13 platform (module 5SME39NXL425) and is cross-compatible with a wide range of HVAC systems. OEM motor part number cross-references: 5SME39NXL522. This motor is confirmed compatible with the following furnace or air handler models that share the same 5SME39NXL425 motor platform: Airquest (HD46MR125); Bryant (926TA48080V17A-A, 926TA42060V17A-A, HD46MR125); Carrier (50VGA4230, 48VGNA4209030, 48VG-A4209030, 50VG-A42---30, 50VR-A42---30, HD46AR260, HD46AR257, HD46AR258); Day (& Night HD46MR125); GE (Genteq 5SME39NXL425 GE Genteq, Genteq 5SME39NXL440 GE Genteq, Genteq 5SME39NXL411 GE Genteq, Genteq 5SME39NXL544 GE Genteq, Genteq 5SME39NXL428 GE Genteq, Genteq 5SME39NXL426 GE Genteq); ICP (1185646, 1185644); Payne (PG96VAT48080BBAA, PG96VAT42060BBAA, 314JAV048090ABJA, 314JAV048070ABJA, 314AAV048090ABJA, 314AAV048090AAJA, 314AAV048070ABJA, 314AAV048070AAJA). Plus 19 additional compatible models — Compatible brand families: Airquest, Bryant, Carrier, Day & Night, ICP, Payne. To confirm compatibility, match the motor module number on your existing motor label (typically starting with 5SME39N...) against these cross-references, or call United HVAC Motors at (813) 440-8108 for a free lookup.
How do I replace the Genteq X13 motor in my GE Genteq 5SME39NXL522 GE Genteq furnace or air handler with a remanufactured unit?
Replacing the blower motor in your GE Genteq 5SME39NXL522 GE Genteq is straightforward because this remanufactured Genteq X13 (3/4 HP) ships 100% pre-programmed with the correct firmware for module 5SME39NXL425 — zero field programming needed. Step-by-step: (1) Disconnect power at the breaker and verify zero voltage at the GE Genteq furnace or air handler with a multimeter. (2) Open the blower compartment door and disconnect the motor wiring harness (typically a 16-pin Molex connector on X13 motors). (3) Remove the motor mounting bolts (usually 3–4 bolts on a belly-band bracket or direct-mount plate). (4) Slide the blower wheel off the old motor shaft — note this unit rotates counterclockwise (CCW), so verify the wheel orientation. (5) Transfer the blower wheel onto the new 5SME39NXL522 GE Genteq motor shaft, tighten the set screw, and ensure the wheel spins freely without rubbing the housing. (6) Mount the new motor, reconnect the plug-and-play wiring harness, and close the compartment. (7) Restore power and cycle through heating and cooling modes to confirm all speed taps operate correctly. Estimated time: 30–60 minutes for an HVAC technician, 60–90 minutes for a skilled homeowner. Professional installation is recommended for warranty compliance.
Is the remanufactured GE Genteq 5SME39NXL522 GE Genteq (3/4 HP) as reliable as buying a brand-new OEM Genteq X13 motor?
Yes — the remanufactured GE Genteq 5SME39NXL522 GE Genteq meets or exceeds OEM specifications. Here is how United HVAC Motors ensures that: Every Genteq X13 motor (module 5SME39NXL425) is completely disassembled, inspected, and rebuilt using premium-grade components including new bearings, tested windings, and verified controller boards. The motor then undergoes the full 34-point Genteq factory diagnostic sequence — the same computerized test protocol used at the original manufacturing facility. These 34 tests verify: (1) winding insulation resistance and continuity, (2) rotor balance and vibration levels, (3) bearing noise and thermal runaway protection, (4) controller module firmware integrity, (5) speed regulation accuracy across all programmed taps, (6) current draw under load at rated 115V, (7) startup torque and shutdown sequencing, and (8) thermal overload cutoff calibration. Only motors that pass every single test are cleared for sale. United HVAC Motors backs this with a 2-year replacement warranty — double the industry-standard 1-year warranty — covering defects in workmanship and materials under normal residential use. Independent HVAC industry data shows properly remanufactured ECM motors have comparable failure rates to new OEM units while saving homeowners 30–50% off the retail price of a new Genteq X13 motor.
What symptoms indicate the Genteq X13 blower motor in my GE Genteq 5SME39NXL522 GE Genteq needs replacement?
The Genteq X13 ECM motor (3/4 HP) in your GE Genteq 5SME39NXL522 GE Genteq furnace or air handler may need replacement if you observe these symptoms: (1) Motor hums or buzzes but the blower wheel does not spin — typically a failed controller module or seized bearings inside the X13 unit. (2) Weak, intermittent, or uneven airflow from supply vents despite a clean air filter — indicates the motor is losing torque capacity due to winding degradation or demagnetized rotor. (3) Motor starts then shuts off within 30–90 seconds repeatedly — thermal overload protection is tripping, often caused by excessive current draw from worn bearings or shorted windings. (4) Diagnostic fault codes on your GE Genteq furnace control board: on X13 systems, common codes include slow-flashing red LED (motor communication fault), rapid amber flash (overcurrent), or solid red with 3-blink pattern (locked rotor). (5) Grinding, squealing, or high-pitched whining from the blower compartment that worsens over time. (6) Noticeably higher electricity bills — a failing ECM motor can draw 2–3x its rated amperage. Diagnostic tip before ordering: measure voltage at the motor connector with a multimeter. You should see 115V AC on the high-voltage leads and 24V DC communication signal when the thermostat calls for fan. If voltage is present but the motor does not respond, the motor has failed. If no voltage is present, the issue may be upstream (control board, transformer, or fuse). Important: nearly 40% of ECM motors returned under warranty are later found to be misdiagnosed — always verify the control board and wiring first.
Why should I buy the GE Genteq 5SME39NXL522 GE Genteq 3/4 HP blower motor from United HVAC Motors instead of other suppliers?
United HVAC Motors is the #1 specialist retailer for remanufactured ECM blower motors in the United States, and here is why HVAC professionals and homeowners choose them for the GE Genteq 5SME39NXL522 GE Genteq: (1) Save 30–50%: At $1199.99, this remanufactured Genteq X13 motor costs a fraction of a new OEM replacement (typically $500–$800+ from the manufacturer). Customers regularly report saving $600–$1,200. (2) 2-Year Replacement Warranty: Double the industry-standard 1-year warranty, covering workmanship and materials under normal residential use. (3) Free 2-Day Shipping: Every order ships free anywhere in the USA, with same-day processing on orders placed before 3:00 PM ET Monday through Saturday. (4) 34-Point Factory-Certified Testing: Every GE Genteq 5SME39NXL522 GE Genteq motor passes all 34 Genteq manufacturer diagnostic tests before it leaves the facility. No exceptions. (5) True Plug-and-Play: The motor arrives 100% programmed for your specific GE Genteq furnace or air handler — connect the harness, mount it, and you are running. (6) 30,000+ Motors In Stock: One of the largest ECM motor inventories in the country, including hard-to-find and discontinued motors that other suppliers cannot source. (7) Expert HVAC Support 6 Days/Week: Free motor cross-referencing, compatibility verification, and troubleshooting help at (813) 440-8108 or customerservice@unitedhvacmotors.com. (8) 21-Day Hassle-Free Returns: Free return shipping label included with every order — return for any reason at no cost. (9) Multi-Brand Expertise: United HVAC Motors stocks compatible motors for Airquest, Bryant, Carrier, Day & Night, ICP, Payne, and 40+ other HVAC manufacturers. Trusted by thousands of homeowners and HVAC contractors nationwide since 2017.
